www.click2go.ie » Mounting Hardware

Manfrotto Plates

Make your Own

Umbrella Mount

Drinker Mount

Laptop Mount

Mobile Phone Mount

Ultra QCR

Combo Series

Comfort Plus Series

Nino Ultra QCR

admin — Fri, 05 Feb 2010 14:25:30 +0000

A range of plates to fit some AbleNet, Tash and QED switches.

Circular

Large Rectangular

Small Rectangular

Small Circular

Triangular

Large Triangular

admin — Thu, 04 Feb 2010 17:08:10 +0000

The TASH “Make your Own” range of tubes, clamps, plates and accessories enables you to put together a customised mounting system.

The picture above shows a leaf switch mounted to a universal table mount mount using a swivel clamp.

Mounting Plates

Gooseneck

Platform Clamp

Sipp and Puff

Universal Table Mount

Swing Away Rod

Bent Tubes

U Clamp

Tube Clamp

Wheelchair Clamp

Pinch Clamp

Swivel Clamp

Tubes

Wheelchair Bracket

admin — Fri, 29 Jan 2010 11:00:41 +0000

RAM rail mount with universal umbrella handle holder. The zinc coated rail mount accommodates piping from 0.50″ to 1.25″ in diameter. The universal handle holder allows you to strap in the handle of an umbrella into the double socket arm of the rail mount.

admin — Fri, 29 Jan 2010 10:55:31 +0000

The RAM composite clamp mount with self-leveling drink cup holder can easily be detached from your wheelchair in seconds. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, including square and circular surfaces. The clamp mount will fit a rail or edge lip from 0.625″ to a maximum of 1.25″.

RAP-B-121-132U. Detachable version

RAM-B-132RU. Non-detachable version

admin — Fri, 29 Jan 2010 10:50:36 +0000

RAM rail mount with universal Tough-Tray™ II netbook/tablet holder. The zinc coated rail mount accommodates piping from 0.50″ to 1.25″ in diameter. The RAM Tough-Tray™ II is spring loaded expandable tray that can accommodate netbooks and tablets that are 8.56″ to 12.31″ wide. Spring loaded to create just the right amount of holding force, most tablets, UMPC’s, and compact laptops can be made safe and secure while on the go. Simple to install and adjust retaining arms insure a perfect fit without interfering with ports or functions. Also, if a compact laptop is in place, these retaining arms hold firm with the screen up or down.

admin — Fri, 29 Jan 2010 10:30:02 +0000

The RAM composite clamp mount with universal cell phone cradle can easily be detached from your wheelchair in seconds. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, including square and circular surfaces. The clamp mount will fit a rail or edge lip from 0.625″ to a maximum of 1.25″. The universal cell phone cradle has padded locking side clamps that close tightly on the item you want to hold. The cradle will hold cell phones that are 1.5″ to 2.5″ in width.

RAM-B-149Z-UN1U. Non-detachable version

RAP-B-121-UN1U. Detachable version

admin — Thu, 28 Jan 2010 14:38:17 +0000

The Ultra QCR is an all encompassing Head Positioning System with adjustment capabilities and a portfolio of options and accessories to meet virtually any client’s needs.

Features:

High quality, elegant but rugged design.
Occipital and Sub Occipital pads incorporate rotational, posterior, anterior and oblique adjustments.
The horizontal distance between the Occipital and Sub Occipital pads is adjustable over a range of 7″. In addition the whole assembly can also be moved in and out from the back of the client’s head.
The Vertical distance between the Occipital and Sub Occipital is adjustable over a range of 3″.
A lateral swing away assembly can be added to mount facial pads or switches on either side of the head.
A Quick release stem allows the entire assembly to be swung out of the way for transfers and hygiene.
Wide range of occipital and facial pads
Available in a wide variety of complete systems (see below) to suit different requirements.

Complete Systems:

	SU108. Standard Ultra headrest with large Occipital and Sub-Occipital but on TWB480 LInk hardware.		A25. Headrest with Egg switches mounted on a swing-away, HMS450 hardware and Occipital only.		A23. Headrest with Egg switches mounted on a swing-away, HMS450 and Sub-Occipital only.
	A20. SU108 model as shown above but with a Mini Proportional joystick mount (SM600) fitted to a swing-away.		A19. SU108 model but with two swing aways. An egg switch is fitted to the lower unit and a spot facial lateral to the other.		SU500. This is the basic Ultra hardware without a Sub-Occipital. It consists of a 6"x3" occipital pad and HMS450 hardware.

admin — Thu, 28 Jan 2010 11:28:38 +0000

An adjustable curved headrest system that lets you set the shape and then reliably holds your settings. Can attach to all of the Stealth hardware options and can be fitted with a swing away system for mounting switches or facial laterals.

The Combo headrest is highly adjustable. It can be equipped with a swing away system and fitted to any Stealth Hardware

A24. This is the Combo headrest fitted to the Ultra Hardware (SU100) together with a swing away system and spot facial laterals.

C9. Combo headrest fitted with a Mini Joystick Mount attached to a swing away. The hardware is a TWB480 with a flip down.

admin — Thu, 28 Jan 2010 11:00:26 +0000

Whether used as a stand alone head support or as part of a larger system, the Comfort Plus provides multiple options for switch sites, lateral facial devices, attachment hardware and more. The cover is removable and washable and the pad is constructed of layered foam on a coated metal shell and covered with a soft, durable stretch material.

Headrest Options:

	CP 100 includes 14" Pad, HMO400 Standard Straight Hardware & Seat Back Mount		CP175 includes a 14" Pad, HMO475 Multi-Axis Hardware & Seat Back Mount		CP180 includes a 14" Pad, TWB480 Link Hardware & Seat Back Mount (3/8" round stem)
	CP200 includes a 10" Pad, HMO400 Standard Straight Hardware & Seat Back Mount		CP275 includes a 10" Pad, HMO475 Multi-Axis Hardware & Seat Back Mount		CP280 includes a 10" Pad, TWB480 Link Hardware & Seat Back Mount (3/8" round stem)

Complete Systems:

B18. CP280 mounted on a quick release stem with an egg switch and a facial pad mounted on swing away arms.

B17. CP280 mounted on a quick release stem with a Mini Proportional Joystick (SM600) fitted to a swing away.

B20. CP280 with a Sipp & Puff mount/tube(SP625) that can be attached to any lateral swing away system.

Description

Part Number

Umbrella Mount

RAM-149Z-B-226U

admin — Thu, 28 Jan 2010 10:00:50 +0000

The Nino Ultra QCR is an all encompassing Head Positioning System with adjustable capabilities and a portfolio of options and accessories to meet virtually any client’s needs. The Nino Ultra is a smaller version of the Ultra and is designed for young children.

Features:

The vertical distance between the Occipital and Sub-Occipital can be easily set over a 1.5″range.
The Sub-Occipital and Occipital incorporate independant ‘fore and aft’ adjustments over a range of 3″ with the Multi-axis mount and 5″ with the LINK mount.
The Nino Ultra can be fitted with a swing away system for switches or spot facial pads.
The Nino Ultra can be fitted to any Stealth Hardware Options.

Complete Systems:

Nino Ultra with swing away system and spot facial laterals fitted.

Nino Ultra with a long lateral pad. The pads can be bent into shape to fit the child's head.

Nino Ultra with egg switch and facial pad mounted on two seperate swing aways.